Mold & Equipment Package # 1
| Mold Description | Qty | ||
| 22" X 144" Adjustable All Purpose Simple Flat Edge | 1 | ||
| 25" X 146" No-Bowl Adjustable All Purpose Mold w/ Flat Edge | 1 | ||
22" Floating Bowl Mold - Any Style |
6 |
||
| 22" Hat Finishing Mold - Any Style | 6 | ||
| 31" X 60" Bathtub Mold Set | 1 | ||
85" X 145" X 3/4" Wall Panel Mold |
1 |
||
60" X 72" Adjustable Shower Pan Mold |
1 |
||
|
|
|||
Toilet Paper Holder Mold Set |
1 |
||
| Soap Dish Holder Mold Set | 1 | ||
| Combination Soap/Shampoo Holder Mold Set | 1 | ||
|
1 | ||
| Corner Soap/Shampoo Combination Holder Mold Set | 1 | ||
| Six Cavity Combination Trim Mold | 1 | ||
| 12" X 120" Corniced Window Sill Mold | 1 | ||
| 12 Cavity 22" End Splash Mold | 1 | ||
| 24 Cavity Sample Mold | 1 | ||
| Flat Elastomer Divider for standard 22" No-Bowl Mold | 5 | ||
| Flat Elastomer Divider for standard 25" No-Bowl Mold | 5 | ||
| Circular Drain Mold | 12 | ||
| Suction Cup | 12 | ||
| Equipment Description | Qty | ||
| Matrix Blenders | |||
150 Pound Matrix Blender |
1 | ||
| One Extra 150 Pound Blender Bucket | 1 | ||
Conveyor, Setup, and Buffing Lines (Per Foot) |
|||
| Set-Up, Transfer, Gel Coat Curing & Demolding Lines | 120 | ||
| Cantilever Bowl Storage-Supply Shelf, 12 Ft | 1 | ||
| Vanity Top Buffing Line ('Open Center' Design) | 12 | ||
| Flat Stock Buffing Line, 39" BF Roller Conveyor | 10 | ||
| Workbench - Two Level, 5 Foot | 1 | ||
Cure-Storage Racks, Multi-Level - Standard 12 Ft Sections |
|||
| Double Wide: 96" Wide - Per Ln/Ft | 48 | ||
| Fixed Style Mold Stops. Dead end stop for end back of racks. | 4 | ||
Vibrating Tables |
|||
| 12 Ft. Long Table w/ Silent Pneumatic Vibrator | 2 | ||
| Scissor Lift / Transfer Carts | |||
| 8 Ft. Lift, 15" to 100" Vertical Travel - 12V-DC | 1 | ||
| Gel Coat Spray Carts | |||
| Tilt / Rotate Style | 1 | ||
V-Guide Floor Rails: |
|||
| (For gel spray carts, transfer carts, and scissor lifts) | |||
| 60 Ft Long. | 2 | ||
Gel Coat Spray Booth (#FS149, external exhaust style) |
1 |
||
| 14 Ft. Wide X 9 Ft. Deep Work Area With 3 HP Hazardous | |||
Exhaust Stack System: (For external exhaust booths to |
|||
| 14 ft. eave height. 30" Dia. Exhaust Ducting, Roof Flange, | 1 | ||
| Rain Skirt & Weather Cap. (Spray & Grinding Booths) | |||
Guide Runner (For Molds) Bundle of ten, 10 ft. pieces. |
6 |
||
| Two runners required for each mold. | |||
 |
 |
